South Side Performance, wants to help you put all that power to the ground. Manufactures include liquid filled rubber mounts in order to minimize vibrations from the engine and transmission inside the cabin. SSP’s solid mounts greatly minimize that vibration, allowing you to decrease wheel hop.
[source: 2009gtr]
The 2010 Chevrolet Camaro has received a good amount of aftermarket attention as of late. Suspension giant Eibach, has announced the release of their anti- roll kit (swaybars) for the Camaro via twitter today. The front swaybar increases the stock diameter by 6 mm to 29mm, it is also two point adjustable. The first rate being 380 lbs/in and the second being 435 lbs/in. The rear also increases the stock diameter by 6mm aswell to 29mm. The rear bar is three way adjustable with the following rates: 553 lbs/in, 658 lbs/in, and 752 lbs/in.
[source: eibach]
If you are v8 R8 owner, currently you maybe weighing your options. Luckily, German tuner MFK Autosports has recently become another option for those looking for modifications. Currently, they are providing an ECU reflash that raises the horsepower output 30HP to a round 450HP. MFK Autosports has also thrown another exhaust option into the ring with the release of their “flap-controlled sport exhaust system”; from the naming we assume that at upper RPM range the driver will be treated to a symphony of V8 goodness.
[source: carscoop]
Carlsson has created a comprehensive package for the new 2009 Mercedes E Class Coupe (Type C 207). Tuning wise, the package consists of an engine tune bringing the coupe’s horsepower level to 435HP, a sport exhaust (spec’ed at 11HP alone), and a sports air filter for better breathing.
Aesthetics have not been ignored with this package. Front and rear spoilers have been created to better reflect the more aggressive nature of the vehicle. The stance is added with either Carlsson’s sports springs or coilover suspension. Looks are rounded out with a 20″ set of Carlsson’s Revo wheels.
[source: carlsson]
Mopar has debuted some aftermarket parts for the widely popular Jeep Liberty at this years Frankfurt Motor Show. The parts, which consist of mostly appearance add-ons, were showcased on what Jeep called their “Moparized” Jeep Liberty. The appearance add-ons include, Chromed Upper Mesh Grille, Chromed Lower Mesh Grille, 18-inch Polished Aluminum Wheels, Chromed Mirror Covers, Chromed Tubular Side Steps, and Chromed Fuel-filler Door. While the only performance part to be featured in the line-up was the Cat-back Exhaust System. All in all these parts appear to be a good way to give a personalized feel with a clean factory fit and finish to your Jeep Liberty.
Prices and Details after the jump.
[Source: Automobilesreview]
Superchips has released their Superchips Bluefin Tuning chip for the BMW 123. The tune produces a 50 bhp increase as well as a 68 ft/lb increase in torque. Bluefin uses an easy to use plug and play design and has over 30 years experience in vehicle tuning and performance.
Specs after the jump.
Available from Graham Goode Racing
[Source: Bluefin]
All catch cans perform the same general task, they catch blow by gas from the motor. Most catch cans have steel wool baffles in order to contain fluid and particles caught by the can. Cusco has improved this greatly by including an “intermolecular attraction filter” in their latest can; the filter uses suction to provide much better separation of particles in the blow by gas.
[source: cusco]
Mine’s is amongst the best names in the world when it comes to GTR tuning. They have recently announced the release of their “Super Camshaft Shore Pro II” and Titanium downpipe for the R35 GTR. The specs on the new camshaft provide a great improvement on lift and duration over the stock units. As with all camshafts, power is relational to the tune, we look forward to seeing power numbers from these.
Coming in at a feather-weight 3.6kg, Mine’s Titanium straight pipe is a must have. The car’s secondary catalytic converters are removed to free up power and replaced with two resonators in order to keep the exhaust note at a manageable level.
[source: gtrblog]
Hamann has announced the release of their new performance and styling parts for the new Ferrari California. While California owners will have to wait on the performance offerings that will come by way of a revised engine management program and new exhaust system, they can set their sights on Hamann’s new carbon fiber rich styling parts.
Hamann’s aerodynamic body parts consist of a full hood, front spoiler, side skirts, 3 piece rear diffuser and smaller rear wing which are all carbon fiber and add stying to the car as well as improving the actual aerodynamics and handling. In addition to the body parts, Hamann is also offering new lightweight forged wheels and interior accessories.
[Source: Hamann]
Cusco is well known for their suspension products, they have numerous applications for all of the vehicles in their line up. The Toyota Wish (ZGE20W) has recently become the center of their attention. They have released their standard OS style front strut tower bar for the front ; increasing structural rigidity. The lower front of the car is braced properly thanks to the rear lower control arm brace.
Due to the torsion beam suspension in the rear, Cusco has created a rear stabilization bar that minimizes body roll and stiffens the rear 130%.
[source: cusco]